![]() Jumpdrive also acts as a rescue image in case if you messed up your installation. You can keep an microSD card specifically for using Jumpdrive, and there are 64MB microSD cards sold cheaply that will suffice. The Jumpdrive image is smaller than 50MB. The process is now finished, and you can boot from eMMC.Once the flashing process is complete, disconnect the PinePhone from your PC, power it down and remove the Jumpdrive microSD card.dev/mm., check for the right device in dmesg, GNOME disks, or similar, and make sure it's unmounted) with your chosen OS image Flash the exposed PinePhone drive (e.g.Connect the PinePhone to your computer using USB-A -> USB-C cable.Boot the PinePhone from the Jumpdrive microSD card.Flash the Jumpdrive image to a microSD card.Download and extract the Jumpdrive image.You can use the dd command or a utility such as Etcher or Gnome Disks, etc. The process of flashing an OS to the exposed and mounted eMMC is identical to that of any other storage medium - e.g. ![]() This utility boots from micro SD and exposes the internal eMMC flash storage when the PinePhone is connected to a computer. The internal eMMC flash storage can be flashed using the Jumpdrive utility by Danct12 and Martijn from postmarketOS.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |